Go
New
Find
Notify
Tools
Reply
  
CoyoteCreek
 Login/Join
 
Member
Posted
I want to Thank everyone that stepped up both days to make it work, I spent alot of time with Gary Garrison he is quite the steward,i thought very much a professonal.
We had a lot of work in front of us with little time to get it done. It wasnt perfect,Success isnt how far you get, but how far you get from where you started.
Hats off to Ron also for making that decision to double up with the shortage of time ,we were still just before nightfall.
Hope to see everyone again.
JMGrimes
 
Posts: 7 | Location: 2514 Quail Run Road,Monroe NC | Registered: April 13, 2009Reply With QuoteReport This Post
Member
Picture of Ron Milam
Posted Hide Post
Greetings All,
I would like to report that the first annual Coyote Creek MTR/STRA Observed Trial was a FANTASTIC weekend. Joe and his wife have a beautiful place. The sections were remarkable. They were all man made, but you would never know it. Joe must have put in at least a million hours of work into them. Every one was just a load of fun.

There were a few issues. Turnout was low enough that peer scoring was necessary. There were some marking issues as well, bur Gary Garrison worked hard with Joe, and they had them in great shape by starting time.

The weather was great. The loop was very short and smooth. Traction was good. There was very little waiting in line. All in all, it was really fun. The drive was long. For me, it was 340 miles each way. But it was worth it and I will be back next year.

Again, on behalf of the STRA, a very big THANKS to Joe and Teresa Grimes and Jim McKenzie for a great trial.
 
Posts: 492 | Location: Whitesburg, Ga. USA | Registered: October 22, 2002Reply With QuoteReport This Post
Member
Picture of Brian Robison
Posted Hide Post
Glad it was good, and in a new area of the South East too. I need the results and a workers list please.

Thanks,
Brian


Awards & Stuff http://metalmarkers.us
 
Posts: 580 | Location: Shelbyville, Tn | Registered: October 17, 2002Reply With QuoteReport This Post
Member
Posted Hide Post
Hello Brian, contact Jim Mckenzie (704-906-3238)he has them,I dont know about your work list.
Hope that helps you out.
JMG
 
Posts: 7 | Location: 2514 Quail Run Road,Monroe NC | Registered: April 13, 2009Reply With QuoteReport This Post
Member
Picture of Brian Robison
Posted Hide Post
OK thanks


Awards & Stuff http://metalmarkers.us
 
Posts: 580 | Location: Shelbyville, Tn | Registered: October 17, 2002Reply With QuoteReport This Post
Member
Picture of Ron Milam
Posted Hide Post
Brian,
I have been private emailing Jim. I hope to get the results and event report soon.
 
Posts: 492 | Location: Whitesburg, Ga. USA | Registered: October 22, 2002Reply With QuoteReport This Post
Member
Posted Hide Post
WOW!
Try--704-202-1529
JMG
 
Posts: 7 | Location: 2514 Quail Run Road,Monroe NC | Registered: April 13, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 


© YourCopy 2001