Anybody know how many CC's per leg. What weight do you run? I was going to put 5wt in. Dwight sold me on the Beta's at Clarksville.

Terry,
I am not absolutely positive, but fairly confident that your forks are basically the same as my '04 forks. The '04 specs are:
Right leg fill to 60 mm from top of tube with fork fully collapsed.
Left leg fill to 120 mm from top with fork fully collapsed and spring inserted. (Betas only have a spring in the left side. Use 5wt oil in both. This method is better than just using a measured amount.

-Ron

I assume that is with the fork off the bike and vertical.

I never cease to be amazed at the ways that humans find to miscommunicate. I should have stated that the fork leg should be vertical. Oh yeah, the axle end should be down.
I hope your likin' the new bike. I am anxious to get some feedback.

-Ron

Don't you just love those kind of questions. Thanks for the measurements though. I don't have a book to reference anything on the Beta but I am wrtiting it down so thanks.I am looking forward to getting some time on it. I will let you know how it goes.

Terry and Ron and all you Beta guys. Take a look at this site. The files are PDF. so you can print them out for the shop.

http://www.kdmototrials.com.au/show_menu.php?menuID=193

Thanks for the link, any help on these bikes is Great!

this is a dead link
what 'bout usd '00 forks?

Yep, looks dead to me. I've got them saved so if anyone wants them I have pdf.s for the Techno and the Rev. Just e mail me.
brian (at sign) metalmarkers.org

check your pm,s

OK all. I put some information on the Honda Trials site.

Click on pdf's.
http://metalmarkers.tripod.com/hondatrials/